Installation Guide
Table Of Contents
- Important Safety INFORMATION
- BEFORE Installation
- Product Specifications
- Provided Materials
- Materials Needed
- Installation
- Built-In Cabinet Instructions
- Installing The Anti-Tip System
- Reversing The Door Swing
- Integrated Door Panel Installation
- Handle Installation
- Electrical Connection
- OPERATION
- Control Panel Layout And Operation
- Error Alarms
- Energy-Saving Tips And Other Notes
- Care and Maintenance
- Troubleshooting
- Warranty
19
Buttons and Indicators
OPERATION
TEMPERATURE DISPLAY SETTING
Press and hold “UP” for 6 seconds to toggle the panel display temperature between the
setting temperature and the real-time temperature of the cabinet interior. The factory preset
temperature display mode is the setting temperature. For faster and more efficient cooling,
close the appliance door after setting the desired temperature.
Upper Zone
Lower Zone
TEMPERATURE UNIT SETTING
Press and hold “UP” and “DOWN” for 3 seconds to toggle the temperature unit to Celsius
or Fahrenheit. Press and hold again to revert.
Upper Zone
Lower Zone
FAST COOLING
Press and hold “UP” and “POWER” for 6 seconds to enter and exit the “fast cooling” mode,
which will more rapidly chill your appliance. This mode will auto exit after the desired
temperature is reached and the fast cooling symbol will disappear.
Upper Zone
Lower Zone
LIGHT CONTROL
Press “LIGHT” once to switch the light on/off when the door is open. Press and hold “LIGHT”
for 6 seconds to enter/exit the “light on” mode. In this mode, the light will stay on for 6
hours, with or without door open.
Upper Zone
Lower Zone