Installation Guide
Table Of Contents
- Important Safety INFORMATION
- BEFORE Installation
- Product Specifications
- Provided Materials
- Materials Needed
- Installation
- Built-In Cabinet Instructions
- Installing The Anti-Tip System
- Reversing The Door Swing
- Integrated Door Panel Installation
- Handle Installation
- Electrical Connection
- OPERATION
- Control Panel Layout And Operation
- Error Alarms
- Energy-Saving Tips And Other Notes
- Care and Maintenance
- Troubleshooting
- Warranty
17
Buttons and Indicators
OPERATION
PRIOR TO OPERATING THE UNIT
• While this unit is capable of operating in ambient temperatures between 50 °F–110 °F
(10 °C–43 °C), it is recommended you install the appliance in a place where the ambient
temperature is generally between 60 °F90 F (16 °C32 °C).
• If the ambient temperature is above or below these recommended temperatures, the
performance of the unit may be affected.
• For example, placing your unit in extreme cold or hot conditions may cause interior
temperatures to fluctuate. This means the desired interior temperature ranges may not be
reached. See more on page 22.
CONTROL PANEL LAYOUT AND OPERATION
Up Down Power Light
Fast cooling Screen lock Maintenance
LightingDefrosting Temp unit
ON/OFF
After plugging in the appliance for the first time, it will be in “stand by” mode, and “OFF”
will display on the screen. Press the “POWER” button once to start the unit. Press and hold
“POWER” for 3 seconds to turn off the unit and return to “stand by” mode. The factory preset
temperature for all models is 38 °F (3 °C), except for wine cooler models. The preset for wine
cooler models is 45 °F (7 °C).
Up Down Power Light
Fast cooling Screen lock Maintenance
LightingDefrosting Temp unit