Installation Guide
Table Of Contents
- Important Safety INFORMATION
- BEFORE Installation
- Product Specifications
- Provided Materials
- Materials Needed
- Installation
- Built-In Cabinet Instructions
- Installing The Anti-Tip System
- Reversing The Door Swing
- Integrated Door Panel Installation
- Handle Installation
- Electrical Connection
- OPERATION
- Control Panel Layout And Operation
- Error Alarms
- Energy-Saving Tips And Other Notes
- Care and Maintenance
- Troubleshooting
- Warranty
11
INSTALLATION
INSTALLING THE ANTITIP SYSTEM
(BUILTIN INSTALLATION ONLY)
1. With built-in installations, once you’ve determined the appropriate height and have
ensured the appliance is level, position the unit at the front of the cutout to install the anti-
tip system, which is necessary to reduce risk of tipping.
2. Using a Phillips-head screwdriver or drill, secure the 2 anti-tip brackets to the top of
the unit using 4 of the provided screws, 2 for each bracket, making sure the lips of the
brackets are facing up and out, as outlined in the image above.
3. Plug the power cord into the wall and push the unit into the cutout, using care to not
tangle or damage the power cord.
4. Once the appliance is in the cutout, secure the anti-tip brackets into the countertop above
using the last 2 screws.
5. If the brackets for the anti-tip system cannot be secured above the appliance and no
wood is available, relocate the brackets for the anti-tip system to the side of the appliance
for securing into an adjacent cabinet, using the same process as above.
WARNING
The anti-tip system must be properly engaged with built-in installations to avoid
the unit tipping over and increasing risk of serious injury or death.
Anti-Tip System