Installation and User Manual
ZLINE Kitchen and Bath provides Attainable Luxury, where the kitchen and bath of your dreams is never out of reach. Through our unique designs and unparalleled quality, we’re dedicated to providing you an elevated experience in the heart of your home. With an endless selection of features and finishes, our inspiration is your reality.
ZLINE is fueled by a passion for innovation; A relentless pursuit of bringing the highest end luxury designs and professional features into everyone’s homes. Because we continually strive to improve our products, we may change specifications and designs without prior notice. WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
TABLE OF CONTENTS IMPORTANT SAFETY INFORMATION ����������������������������������������������������������� 1 BEFORE INSTALLATION ����������������������������������������������������������������������������������� 5 Product Specifications ������������������������������������������������������������������������������������������5 Provided Materials ����������������������������������������������������������������������������������������������8 Materials Needed �������������������������������������������������
IMPORTANT SAFETY INFORMATION • IMPORTANT: Read all instructions before using this appliance. Use this appliance only for its intended purpose as described in this manual. Always exercise basic safety precautions, as described below. After reading this manual, store it in an accessible place where users and services can easily reference it. • The purpose of these safety precautions is to ensure safe and correct use of the product to minimize risks that could cause serious damage and injury to you or others.
IMPORTANT SAFETY INFORMATION WARNING • Installation and service should be performed by a qualified installer. The appliance should not be adjusted or repaired by anyone except qualified service personnel. Attempting to perform these yourself could result in fire, malfunction, or injury. • Never splash water directly onto the appliance or wash it with water without unplugging it from power, as a short circuit could result.
IMPORTANT SAFETY INFORMATION • Disconnect the power cord plug from the wall outlet before moving the unit and make sure that the power cord is not damaged during transport. A damaged power cord could result in electrical shock and/or fire. • Never unplug the unit by pulling on the power cord. Always grip the plug firmly and pull straight out from the outlet. Pulling the cord could cause wire breakage, possibly resulting in overheating and fire. Never pull out plug when hands are wet.
IMPORTANT SAFETY INFORMATION Risk of child entrapment. To avoid safety and suffocation risks for children or WARNING pets, before you dispose of the appliance, take off the doors and drawers and leave the shelves in place so children or pets may not climb inside. • Condenser water from the appliance evaporator drains into a hole in the floor of the storage compartment and is channeled into a drain pan located at the back of the appliance on the compressor.
BEFORE INSTALLATION PRODUCT SPECIFICATIONS Model RWDO-GS-24 RWDPO-24 Dual-Zone Dual-Zone Description Stainless Steel Glass Door Panel-Ready Glass Door Weight 169 lb (77 kg) 161 lb (73 kg) Voltage/Frequency/Max Amp Draw 115-120VAC/60Hz/15A 23 7/8" W × 23 3/16" D × 34" H *Product Dimensions 606 mm W x 589 mm D x 864 mm H Ambient Temperature Range 50 °F–110 °F (10 °C–43 °C) Operating Temperature Range Both zones: 40 °F–65 °F (4 °C–18 °C) 5 Full Depth Stainless Steel Wire Rack Shelf Configuration 1 Half Depth S
BEFORE INSTALLATION PRODUCT SPECIFICATIONS Model RBSO-GS-24 RBSPO-24 Beverage Center Beverage Center Description Stainless Steel Glass Door Panel-Ready Glass Door Weight 154 lb (70 kg) 147 lb (67 kg) Voltage/Frequency/Max Amp Draw 115VAC/60Hz/15A 23 7/8" W × 23 3/16" D × 34" H *Product Dimensions 606 mm W x 589 mm D x 864 mm H Ambient Temperature Range 50 °F–110 °F (10 °C–43 °C) Operating Temperature Range 34 °F–65 °F (1 °C–18 °C) 1 Full Depth Stainless-Steel Wire Rack Shelf Configuration Glass Shelves: 2 F
BEFORE INSTALLATION PRODUCT SPECIFICATIONS Model RBSO-ST-24 Description Refrigerator Stainless Steel Solid Door Weight 139 lb (63 kg) Voltage/Frequency/Max Amp Draw 115VAC/60Hz/15A 23 7/8" W × 23 3/16" D × 34" H *Product Dimensions 606 mm W x 589 mm D x 864 mm H Ambient Temperature Range 50 °F–110 °F (10 °C–43 °C) Operating Temperature Range 34 °F–65 °F (1 °C–18 °C) 3 Full Depth Glass Shelves Shelf Configuration 1 Half Depth Glass Shelf (at bottom) Interior Capacity 5.2 cu. ft.
BEFORE INSTALLATION PROVIDED MATERIALS IMAGE DESCRIPTION Foot adjustment wrench (1) Anti-tip brackets (2) Screws for anti-tip brackets (6) Door limiting pins (2) *Screws for custom panel installation (10) Decorative plugs (4) Allen key (1) Materials Provided and Needed * Not needed for stainless steel door models; see page 13 for panel-ready information.
INSTALLATION BEFORE INSTALLING YOUR REFRIGERATOR • Remove all exterior and interior packing and dispose appropriately. • Before connecting the unit to the power source for the first time, let it sand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the sealed cooling system from handling during transportation. • Clean the interior surface with lukewarm water using a soft cloth and wipe dry.
INSTALLATION BUILT-IN CABINET INSTRUCTIONS While this unit is designed for both built-in and freestanding installation, built-in installation is recommend to reduce risk of tipping. If you plan to use this unit in a built-in application, please follow the cabinet cutout requirements shown below.
INSTALLATION INSTALLING THE ANTI-TIP SYSTEM (BUILT-IN INSTALLATION ONLY) 1. With built-in installations, once you’ve determined the appropriate height and have ensured the appliance is level, position the unit at the front of the cutout to install the antitip system, which is necessary to reduce risk of tipping. 2.
INSTALLATION REVERSING THE DOOR SWING This appliance has the capability of the doors opening from either the left or right side. The unit is delivered to you with the doors opening from the left side (Figure 1). Should you desire to reverse the opening direction (Figure 2), follow the instructions below. NOTE: A second person is recommended with this task due to the weight of the door.
INSTALLATION INTEGRATED DOOR PANEL INSTALLATION RWDPO-24 and RBSPO-24 models are manufactured without door panels and handles. To install a custom integrated panel around the glass door, follow the instructions and dimensions below and on the next page. NOTE: Custom handles need to be affixed to the panel prior to installing the panel onto the appliance (see page 15). Finish all sides of the custom panel. They may be visible when the door is open.
INSTALLATION INTEGRATED DOOR PANEL INSTALLATION INSTRUCTIONS 1. Remove the door from the unit as outlined in the steps on page 12. 2. By hand, remove the rubber door seal to access the panel mounting holes. Set the seal aside and place the door face side up on a stable surface. 3. Place the panel onto the door and align the top be flush with the top of the door. 4. Adjust the overlap of the panel — panel width (23 5/8" or 600 mm) is slightly smaller ) 39 mm 4" (5door.
INSTALLATION HANDLE INSTALLATION Prior to installing a custom integrated panel around the glass door on RWDPO-24 and RBSPO-24 models, handle(s) need to be affixed to the panel first.
INSTALLATION ELECTRICAL CONNECTION • For your personal safety, this appliance must be properly grounded. In the event of an electrical short circuit, grounding reduces the risk of shock by providing an escape wire for the electric current. • This appliance is equipped with a cord having a grounding wire and a grounded plug.
OPERATION PRIOR TO OPERATING THE UNIT • While this unit is capable of operating in ambient temperatures between 50 °F–110 °F (10 °C–43 °C), it is recommended you install the appliance in a place where the ambient temperature is generally between 60 °F–90 F (16 °C–32 °C). • If the ambient temperature is above or below these recommended temperatures, the performance of the unit may be affected. • For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate.
Defrosting Temp unit Lighting Defrosting Temp unit OPERATION TEMPERATURE SETTING Press “UP” or “DOWN” once to start the temperature setting. The current temperature setting will start flashing. Then press “UP” or “DOWN” to increase or decrease the temperature setting by 1 °F/ °C intervals. Settings will stop at the minimum and maximum levels once you reach them. The setting value will auto save after 5 seconds or if the door is closed.
Upper Zone OPERATION Upper Zone Lower Zone Upper Zone TEMPERATURE DISPLAY SETTING Lower Zone Upper Zone Press and hold “UP” for 6 seconds to toggle the panel display temperature between the Lower Zone of the cabinet interior. The factory preset setting temperature and the real-time temperature temperature display mode is the setting temperature. For faster and more efficient cooling, Lower Zone close the appliance door after setting the desired temperature.
OPERATION AUTOMATIC DEFROSTING The automatic defrosting symbol will illuminate, as seen below. During automatic defrosting, the unit’s compressor stops for 30 minutes for every 6 hours of the system running. SABBATH MODE Press and hold “UP” and “LIGHT” for 6 seconds to toggle on/off “Sabbath mode.” This mode will shut off the screen display, operating sounds, and light while the unit still runs automatically according to the previous temperature setting.
OPERATION ERROR ALARMS This refrigerator has built-in alarm system feature that activates when the unit detects any malfunction in the sealed cooling system. If the temperature display window displays , , or , and the “ALARM” indicator begins flashing, please proceed to “Troubleshooting” on page 25. WINE STORAGE TEMPERATURES • While certain wines store best at temperatures between 56 °F–58 °F (13 °C–14 °C), your unit also allows you to store wine at drinking temperatures.
OPERATION ENERGY-SAVING TIPS AND OTHER NOTES • Do not place the unit next to a heating vent, a range/oven, or in direct sunlight. • Keep the door closed as much as possible, especially in hot, humid weather. • Cover foods and beverages to reduce moisture buildup inside the appliance. • A temperature sensor records the average temperature of the unit.
CARE AND MAINTENANCE Make sure the appliance is fully disconnected from power before performing WARNING any cleaning or maintenance to avoid risk of electric shock or injury. CLEANING THE EXTERIOR Clean the exterior stainless steel with a cloth dampened in mild soapy water. After cleaning, dry thoroughly with a soft cloth and polish with a stainless steel cleaner. To clean the door gasket, use only mild soapy water. Never use harsh cleansers or scouring pads to clean any part of your unit.
CARE AND MAINTENANCE WINTERIZING YOUR UNIT If an outdoor refrigerator will be exposed to temperatures of 40 °F (4 °C) or less, perform the following steps to winterize the unit so it will keep it in good condition while facing the winter elements. It is important to clean and dry this appliance to prevent severe mold and mildew growth from engulfing the fridge’s interior. 1. Turn the unit OFF by pressing the POWER button on the control panel. 2. Remove all food and drink contents from the refrigerator. 3.
TROUBLESHOOTING ISSUE Unit does not turn on Noise or vibration Unit is too warm POSSIBLE SOLUTION Not plugged in. Fuse blown or circuit breaker tripped. Press Power Button on control panel Check that unit is level. If not, adjust leveling legs. Check that door is properly closed and sealed. Check temperature setting. To change the temperature setting, follow the steps in “Control Panel Layout And Operation” on page 17 of this manual.
WARRANTY COVERAGE ZLINE Kitchen and Bath Touchstone Undercounter Refrigeration appliances have a two year parts and service warranty and a five year parts warranty for a sealed cooling system. This is from the original purchase date for the original purchaser of the product. TERMS This warranty applies only to the original purchaser of the product installed for normal residential use. This is defined as a single-family, residential dwelling in a non-commercial setting.
WARRANTY NOTE: Please write down the model number and serial number of your appliance. The model number is located on the rating label on the top of the unit. The serial number is located on the top center of the interior on your appliance. Both are needed to obtain warranty service. Do not remove permanently affixed labels, warnings, or plates from the product. This will void the warranty. You may also consider attaching your receipt or proof of purchase to this manual.
1.6.1 1-614-777-5004 www.zlinekitchen.com contact@zlinekitchen.
