Installation Guide

18
4. Next, slide the outer trim into the cabinet cutout and use a marker or pencil to mark
where the buckles line up. Then, remove the trim and secure the four buckle seats into
the cabinet using the other eight #2 screws (see Figure 8). Make sure the clamp of the
bucket seats are facing toward you (see Figure 9).
Figure 8
Figure 9
① 将安装好卡扣的外观框放在橱柜上作出比对；用记号笔画上安
装位置
② 用 1#螺丝将卡座安装在对应安装位置上
①
Use 2# screws to install the four buckles on the corresponding mounting
holes around the trim kit 使用 2#螺丝将四个卡扣安装在外观框四周对
应的安装孔上
Place the trim kit which install buckle on the cabinet for
contrast, then use marker strokes to draw the mounting
position
① 将安装好卡扣的外观框放在橱柜上作出比对；用记号笔画上安
装位置
② 用 1#螺丝将卡座安装在对应安装位置上
①
Use 2# screws to install the four buckles on the corresponding mounting
holes around the trim kit 使用 2#螺丝将四个卡扣安装在外观框四周对
应的安装孔上
Place the trim kit which install buckle on the cabinet for
contrast, then use marker strokes to draw the mounting
position
Trim Kit Installation
INSTALLATION TRIM KIT