Installation Guide

13
HANDLE INSTALLATION
NOTE: The Allen/hex key needed to remove the handle is only included with Autograph
Edition handles (Champagne Bronze, Polished Gold, and Matte Black).
Autograph Edition handles
1. Locate the holes on the underside of each handle base.
2. Using a 7/64" Allen/hex key, turn counter-clockwise to loosen both the left and right
set screws.
3. Carefully remove the handle. If installing an Autograph Edition handle, carefully place
the new handle on the mounting studs. Then, using the Allen/hex key, tighten the left and
right set screws in a clockwise motion until the handle is firmly in place.
Scan to follow along with a video.
Handle Installation
INSTALLATION HANDLES