User manual

ZL ELECTRONICS TECHNOLOGY (HK) CO., LIMITED
without problem.
3 Before install the SIM card; make sure to cut off power from the GPS Tracker unit. The
correct installation method is to push the tray completely into the GPS Tracker unit, until you
feel it is hooked by something.
4 Find a suitable place inside the car for installing the unit.
5 Check if all the wiring has been connected correctly; then connect the GPS Tracker unit to
the power source.
2.3. INSTALLATION
2.3.1 Step 1: Install SIM Card
1
Using a speculate object to poke the small button of the SIM card seat, and then it will pop-
up a small drawer.
2
Put the SIM card in the drawer, and put back the drawer, as direction shown in the picture.
3
Make sure to turn off the power before install the SIM card.
4
Make sure to deactivate the PIN code, so that the SIM card can operate without PIN
protection.
5
Before install the SIM card to the GPS Tracker, please use a mobile phone to make sure the
SIM card can make & receive phone calls without problem.
6
Before install the SIM card to the GPS Tracker, please use a mobile phone to empty the
SMS storage of the SIM card.
2.3.2 Step 2: Connect GSM Antenna
1
Connect the GSM Antenna to the unit.
2
Fasten the connection by turning the screw in the bottom.
3
Please do not swing round the antenna itself.
2.3.3
Step 3: Connect GPS Antenna
1
GPS antenna is used to receive satellite signals in the sky. It should be positioned at a
place where it will have an unobstructed view of the sky. The ideal location is top of the
dashboard or close to the rear window of the car.
2
GPS antenna can pick up signals through glass and plastic, but will not "see the sky"
through metal or other conductive surfaces. To avoid distractions of GPS signal, make sure
5