User Manual
Table Of Contents
ZKAM20 & ZKAM20A User Manual
Page | 20 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
3. Plug in the master to receive, and dial both to 2 at the same time.
4. Two dial back to 1 at the same time, the program will set to 7 or 8 and press the reset key to take effect.
System Error Alarm
1. Check whether there is a tag within 2m of the equipment.
2. Press the reset button to wait for the alarm, adjust the threshold gear to match the digital display, and
press the reset button to take effect.
3. Set the program to 1 or 2, adjust the alarm threshold appropriately, and press the reset key to take
effect.