User Manual

Table Of Contents

ZKAM20 & ZKAM20A User Manual

3 Deactivator and Detacher

Deactivator

3.1.1 Instruction

The AM(Acoustic Magnetic) deactivator is an accessory product of 58kHz AM detection system.Used to

decode soft tags. It consists of 18V AC power adapter and decoder board. The green light on the decoding

board represents the working indicator, which is always on in the standby state, and the red light is on and

the buzzer sounds when decoding. Try to place the item as close to the center of the deactivator panel as

possible while decoding, and try back and forth a few times until the buzzer does not sound. The

deactivator is used in conjunction with the 58kHz AM detection system, and is generally installed on the

cashier to decode the protected goods.

3.1.2 Power Supply

Name Parameter

Input Power 18V, 1.5A(AC)

Power Insurance

250V, 1A

Decoding Height

maximum 12cm (soft tag)

Maximum Current

600mA (when decoding)

Quiescent Current

not more than 100mA

3.1.3 Installation Preparation

• Determine the installation position, the hole’s size is 196mm*168mm.

• The product is divided into 110V and 220V, please confirm whether the voltage matches before use.

3.1.4 Deactivator and Soft Tag