User Manual
Table Of Contents
- USER MANUAL
- 1 Instruction for Use
- 2 Main Menu
- 3 User Management
- 4 Department Set
- 5 Shift Set
- 6 Report Management
- 7 System Setting
- 8 Data Management
- 9 Record Query
- 10 System Information
- 11 Appendix
Press▲/▼select a workcode,
press
Press to .
Press to exit.
When the work code function is enabled, the device displays the work code selection interface upon successful
verification on the initial interface.
On the initial interface,
Press finger/input ID/Punch Card.
Press ▲/▼ to select or enter a
workcode then press .
Verified!
: After the work code function is enabled, a work code must be entered for verification. Employees without a work
code can enter any inexistent work code for verification.
You can upgrade the firmware program of the FFR terminal by using the upgrade file in the USB disk through this
parameter.
Press on the initial
interface.
Select and press .
Select Update firmware and press
M/OK.