User Manual

Table Of Contents

Set system parameters to meet user requirements to the greatest extent in terms of functions and display.

Press on the initial

interface.

Select and press .

This option is used to set the extent of matching between an input ID/fingerprint and that stored in

templates in the ID and fingerprint identification mode.

This option is used to set the extent of matching between an input ID/fingerprint and all those stored in

templates.

The recommended thresholds are as follows:

This option is used to set the time format displayed on the initial interface of the popular color-screen

FRT.

Select a desired date format by pressing . The popular color-screen FRT supports 10 date formats: YY-MM-DD,

YY/MM/DD, YY.MM.DD, MM-DD-YY, MM/DD/YY, MM.DD.YY, DD-MM-YY, DD/MM/YY, DD.MM.YY and

YYYYMMDD.

Set whether to generate a beep sound in response to every keystroke by pressing . Select to enable the

beep sound, and select to mute.

: Set whether to generate a voice prompt in response to every operation by pressing .

: If a user’s attendance record already exists and the user signs in again within the specified period (unit:

minute), his/her second attendance record will not be stored. (Value scope: 0–60. 0: Save all the records passing the

verification.)

Move the cursor to the desired option by pressing ▲/▼. Enter a desired

value in the entry box by using the keypad. Press in the scroll box to

switch to the desired value. After finishing the setting, press to

save your settings and return to the previous interface. Press to

cancel your settings and return to the previous interface.