User Manual

Press ▼to select
then press .
Downloading......
Data download succeed!
Press to take out the USB
disk or SD card.
Open the setting "AttSettingE.xls" in the USB disk or SD card on a PC. Set the in the .
The shifts that have been set on the attendance machine shall be displayed. (For more details, see 5.2 Shift Setting) You
can modify the 24 shifts and add shifts. After modification, the shifts shall prevail on the attendance machine. For more
details, see "How to arrange schedules using the attendance setting report" in the "Self-Service Attendance Terminal
FAQs."
Set a schedule setting report
Enter the , , and respectively on the left of the . Set shifts for employees
on the right of the , where shifts 1–24 are shifts those set in the and
shift 25 is for leave and shift 26 is for out.
Notes:
1. The shifts of only 31 days can be arranged in one schedule setting report. For example, if the scheduling date is
2012-1-1, the schedule setting report contains the schedules of 31 days after 2012-1-1, that is, schedules from 2012-1-1
to 2012-1-31. If the scheduling date is 2012-1-6, the schedule setting report contains the schedules of 31 days after
2012-1-6, that is, schedules from 2012-1-6 to 2012-2-5.
2. If no schedule setting report is set, all employees use the report 1 by default from Monday to Friday.
Enter the on/off duty time in the corresponding
columns, where the shall be the on/off duty
time of 5.2 Shift Setting in and the
shall be the on/off duty time of .
For the correct schedule time format, see "What is the correct
time format used in the setting reports" in the "Self-Service
Attendance Terminal FAQs."