User's Manual
Table Of Contents
- 1 Notice for Use
- 2 Main Menu
- 3 User Management
- 4 User Role
- 5 Communication Settings
- 6 System Settings
- 7. Personalize Settings
- 8. Data Management
- 9. Access Control
- 10. USB Manager★
- 11. Attendance Search
- 12. Autotest
- 13. System Information
- 14. Connect to ZKBioSecurity Software
- Statement on the Right to Privacy
- Eco-friendly Use
70 Linux Visible Light Product User Manual
14. Connect to ZKBioSecurity Software
14.1 Set the Communication Address
Device side
1. Click COMM. > Ethernet in the main menu to set IP address and gateway of the device. (Note: The IP address
should be able to communicate with the ZKBioSecurity server, preferably in the same network segment with the
server address)
2. In the main menu, click COMM. > Cloud Server Setting to set the server address and server port.
Server address: Set as the IP address of ZKBioSecurity server.
Server port: Set as the service port of ZKBioSecurity (The default is 8088).
Software side
Login to ZKBioSecurity software, click System > Communication > Communication Device to set the adms
service port, as shown in the figure below: