User's Manual

Linux Visible Light Product User Manual 55
triggered due to failed verifications.
Door available
time period
★
To set time period for door, so that the door is available only during this.
Normal Close Time
Period
Scheduled time period for “Normal Close” mode, so that no one can gain access during
this period.
Normal Open Time
Period
Scheduled time period for “Normal Open” mode, so that the door is always unlocked
during this period.
Master device
★
When setting up the master and slave, the status of the master can be set to out or in.
Out: The record verified on the host is the exit record.
In: The record verified on the host is the entry record.
Auxiliary input
configuration
Set the door unlock time period and auxiliary output type of the auxiliary terminal
device. Auxiliary output types include None, Trigger door open, Trigger Alarm, Trigger
door open and Alarm.
Valid holidays
To set if Normal Close Period or Normal Open Period settings are valid in set holiday time
period. Choose ON to enable the functions during holiday.
Speaker Alarm
To transmit a sound alarm or disassembly alarm from the local. When the door is closed
or the verification is successful, the system will cancel the alarm from the local.
Reset Access
Setting
The restored access control parameters include door lock delay, door sensor delay, door
sensor type, normal close time period, normal open time period,
auxiliary input
configuration and alarm. However, erased access control data in Data Mgt. is excluded.
9.2 Time Schedule
The entire system can define up to 50 time periods. Each time period represents seven time zones, i.e. one week,
and each time zone is a valid time period within 24 hours per day. User can only verify within the valid time period.
Each time zone format of the time period: HH MM-HH MM, which is accurate to minutes according to the 24-hour
clock.
Click Time Schedule on the Access Control interface.
1. Click the grey box to input a time zone to search. Enter the number of time zone (maximum: 50 zones).