User's Manual
Table Of Contents
- 1 Notice for Use
- 2 Main Menu
- 3 User Management
- 4 User Role
- 5 Communication Settings
- 6 System Settings
- 7. Personalize Settings
- 8. Data Management
- 9. Access Control
- 10. USB Manager★
- 11. Attendance Search
- 12. Autotest
- 13. System Information
- 14. Connect to ZKBioSecurity Software
- Statement on the Right to Privacy
- Eco-friendly Use
Linux Visible Light Product User Manual 37
Week mode Date mode
When restoring the factory settings, the time (24-hour) and date format (YYYY-MM-DD) can be restored, but the
device date and time cannot be restored.
Note: For example, the user sets the time of the device (18:35 on March 15, 2019) to 18:30 on January 1, 2020.
After restoring the factory settings, the time of the equipment will remain 18:30 on January 1, 2020.
6.2 Attendance/Access Logs Setting
Click Attendance/Access Logs Setting on the System interface.
Item
Description
Duplicate Punch
Period (m)
Within the set time range, the attendance record of the same person will not be
saved; the valid value ranges from 1 to 999999 minutes.
Camera Mode
Whether to capture and save the current snapshot image during verification. There
are 5 modes:
No Photo: No photo is taken during user verification.
Take photo, no save: Photo is taken but is not saved during verification.
Take photo and save: Photo is taken and saved during verification.
Save on successful verification:
Photo is taken and saved for each successful
verification.
Save on failed verification: Photo is taken and saved during each failed verification.