User's Manual

22 Linux Visible Light Product User Manual
Note: The password may contain one to eight digits by default.
 Register user photo
When a user registered with a photo passes the authentication, the registered photo will be displayed.
Click User Photo, click the camera icon to take a photo. The system will return to the New User interface after
taking a photo.
Note: While registering a face, the system will automatically capture a picture as the user photo. If you do not want
to register a user photo, the system will automatically set the picture captured as the default photo.
 Access Control Role
★
User access control sets the door unlocking rights of each person, including the group that the user belongs to, the
verification mode, duress fingerprint and whether to apply group time period.
Click Access Control Role > Access Group, assign the registered users to different groups for better management.
New users belong to Group 1 by default, and can be reassigned to other groups. The device supports up to 99
access control groups.
Select verification mode for the user, click Access Control Role > Verification Mode.
Duress Fingerprint: The user may specify one or more fingerprints that have been registered as a duress
fingerprint(s). When press the finger corresponding to the duress fingerprint on the sensor and pass the verification,
the system will immediately generate a duress alarm.
Select whether to apply group time period.