Installation Guide

inBIO-Series Access Control Panels & ZKAccess 5.2 software INSTALLATION GUIDE

Adding a Device

4. After searching, the list of all access control panels on the network

will be displayed.

5. Click Add Device on the right side of the listed device, and a dialog box will open.

6. Enter self-dened device name, and

click OK to complete the process.

The default IP address of the access

control panel may conict with the IP of

another device on the network.

7. You can modify the IP address: Click

Modify IP Address to the right of

the device and a dialog box will

open. Enter the new IP address and

other parameters

Note: Must congure the gateway and IP address in the

same network segment

1. Click Device

2. Click Search Panels , to show the Search interface;

3. Click Search , and it will prompt [searching……];