Quick Start Guide Aurora T1 Version: 1.0 Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the actual product and the written information in this manual.
1. Overview Front View Side View Indicator Time Display Area Speaker Fingerprint Sensor Rear View Power Interface 2.
. Device Installation Mount on the Desk 1) Hold the Device with both the hands, and rotate the back cover to 180 degree to disassemble the Device. 2) Pass the power cable through the wiring hole of the back cover and insert it into the power interface. 3) After wiring the power cable, push the back cover onto the Device, and rotate it in the clockwise direction to close it. 4) Use the 3M double-sided tape to fix the device on the desktop.
1. 4. Connect the Device Step 1: Software Application Access Contacts Home Organization 1 Work Device Custom Field Employee My Company Yang Yang Kaijin 1190130 2 Zk0 3 General Personal Document Device Access APP Access 4 Account Information Email 5 native.yang@zkteco.
Step 2: Create the Area Contacts Home Dashboard Area Attendance Policy Aurora T1 Approval Settings Schedule Work 1 3 Code Device My Company Area Name 6192202300106 Aurora T1 Purpose Superior Attendance Select Remark Employee Device Save Area Delete 2 Assignment Field Work Daily Activity Reports In the software, the device areas need to be created on the Web in advance. Click Work > Device >Area on the Web. Code: Enter the serial number of the device.
Step 4: Activate and login the APP account Open the ZKBioCloud APP, enter the registered account and password on the App interface, and then login after the account is activated.
Step 5: Bind Device 1 Power on the Device. Switch to the Work interface in the ZKBioCloud APP; tap Device to enter the Device management interface; tap + in the upper right corner to add the Device; select the Bluetooth Device, and the phone will automatically search for the device. Note: 1. In the mobile phone turn on the bluetooth function, and the location service. 2. The device needs to be close to the phone to avoid the search failure.
2 After the bluetooth connection is successful, it will automatically navigate to the "Network Setup" page. Select the corresponding wifi, and enter the password. (The Device flashes yellow when it connects the Wifi successfully, and after it is successfully connected to the server, the light turns to green.) When the Device is successfully connected to the network, the Device name, Time Zone and Area can be changed according to the actual requirement.
5. Enroll Fingerprint Switch to the Work interface in the ZKBioCloud APP, tap My Team in the Attendance list interface, and then select the employee who needs to enroll fingerprint. Tap Enroll Biometric Template, then select the Enroll Fingerprint, and then register the fingerprint on the Device according to the prompts of the Device.
6. Punch/Verify After successful enrollment, the user can punch on the device, or through the APP.
7. Export Attendance Report On the ZKBioCloud web side, select Reports and enter the information of the required employee to generate the report.
-9-
