User Guide
11
Click "Read Conguration" to display the configuration information of the card reader.
On the “Page Conguration” page, click “Export Conguration” to exporting the page
configuration information of the current device, click the “Import Conguration” to importing
configuration information.
Note:
This function is used by before and after reset. After the reset, the function parameters will be
restored to the default values, and need to be reload the setting parameters to read PDF417 and
QRcode. Therefore, it needs to be configured according to section 4.2.Before reset, you need to
back up .json. Otherwise, please do not restore factory settings.
The imported and expor ted configuration files can only be cfg.json files.
①
The exported configuration file can be used for one-key configuration. When entering the
advanced settings page, the configuration information will also be loaded according to the
cfg.json configuration file.
②
If there is no cfg.json configuration file in the .exe directory, when you enter the advanced
settings page, the background will generate a cfg.json file by default.
③
Once you have set the parameters, click "Write Conguration" to write the information to
the card reader.
2.
3.
4.6 Import and Export Configuration
Operation Steps: