User Guide

9
On the "QR Code Parameter setting" page.
Wiegand Mode
Output Format
When Wiegand outputs the card number/information, the card number can be output
in forward/reverse direction.
Parity Check
Whether to transmit the Wiegand check bit, output/non-output can be selected.
Pulse Width
Wiegand pulse width, optional (1~99) * 10us
Pulse Interval
Wiegand pulse gap, optional (0~89) * 100+1000us.
Write Configuration
Read Configuration
Parameter
Description
Wiegand 26, 34 and 66 are available.
After modifying the above parameters, click ”Write configuration”, that is, the new
configuration information is successfully written to the card reader.
Get the current configuration information of the reader and display it.
2.
QR Code Mode
Repeat Swipe Time
Repeat swipe time can be set by 0(ms), 500(ms), 1000(ms), 1500(ms) or 2000(ms).
Parameter
Description
After setting the parameters, click "Write QR code parameter settings" to write the
information into the card reader. Click "Read QR code parameter settings" to display the
configuration information of the card reader.