User Guide

18 QR Code as the Mobile Credential
On the server, choose [System] > [Authority Management] > [Client Register] to add a
registered App client.
1.
In [System] > [Basic Management] > [Parameters] of ZKBioSecurity software, set Enable QR Code
to “Yes”, and select the QR code status according to the actual situation.
2.
Open the APP, enter the IP address or domain name of the server, and its port number, scan the
Register QR-code. After the connection is successful, tap on Employee to switch to the Employee
Login screen. Enter the Employee ID and Password (Default: 123456) to login.
Tap [Mobile Credential] on the APP, and a QR code will appear. Place the phone screen right in
front of the device QR code scanner. For details, please refer to the ProFace x (DS) User Manual.
4.
3.
Note:
Place your phone within 15-50cm of the device (distance depends on the size of the phone
screen and the density of the QR code). Do not block the camera and the QR code.
For more details of Dynamic QR Code, please refer the ZKBioSecurity Mobile APP User Manual.
2.
1.
14