User Guide
12
15 Detection Management
Clickon > [Detection Management]to enter the setting interface.
Main Menu
User Mgt.
User Role
COMM.
System
Data Mgt.Personalize Attendance
Search
Autotest
System Info
Access Control
Print
L
You can enable mask detection function, and enable the Deny Access Without Mask and the
Trigger External Alarm, the device will send an alarm prompt when the user doesn’t wear a mask,
meanwhile the user will be forbidden to access, as shown in the following figure.
1
When the Allow Unregistered People to Access is enabled, you can also set Enable Capture of
Unregistered Person to save the user photo.
Enable Mask Detection
Deny Access Without Mask
Allow Unregistered People to Access
Enable Capture of Unregistered Person
Trigger External Alarm
Clear External Alarm
External Alarm Delay(s)
Detection Management
10
Update Firmware
2
08:50
Failed to verify.
Verify:Face
User ID:1
Without Mask
08:50
Successfully verified.
Name:Mike
User ID:1
Verify:Face
Mask Detected
System
Date Time
Access Logs Settings
Temperature Mgt.
Detection Management
Device Type Settings
Security Settings
Reset
Video Intercom Parameters
Face
L