User's Manual

Table Of Contents

4-inch Visible Light Terminal

User Manual

Duress Options 10.6

Once a user activates the duress verification function with specific authentication method(s), and when

he/she is under coercion and authenticates using duress verification, the device will unlock the door as

usual, but at the same time, a signal will be sent to trigger the alarm.

On Access Control interface, tap Duress Options to configure the duress settings.

Function Description

Function Name

Description

Alarm on Password

When a user uses the password verification method, an alarm signal will be

generated only when the password verification is successful, otherwise there

will be no alarm signal.

Alarm Delay (s)

Alarm signal will not be transmitted until the alarm delay time is elapsed. The

value ranges from 1 to 999 seconds.

Duress Password

Set the 6-digit duress password. When the user enters this duress password for

verification, an alarm signal is be generated.