User's Manual

4-inch Visible Light Terminal User Manual
Page | 55 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
New Bell Schedule
Tap New Bell Schedule on the Bell Schedule interface to add a new bell schedule.
Function Description
Function Name
Description
Bell Status
Toggle to enable or disable the bell status.
Bell Time
Once the required time is set, the device will automatically trigger to ring the bell
during that time.
Repeat
Set the required number of counts to repeat the scheduled bell.
Ring Tone
Select a ring tone.
Internal bell delay(s)
Set the replay time of the internal
bell. Valid values range from 1 to 999
seconds.
All Bell Schedules
Once the bell is scheduled, on the Bell Schedules interface, tap All Bell Schedules to view the newly
scheduled bell.
Edit the scheduled bell
On the All Bell Schedules interface, tap on the required bell schedule, and tap Edit to edit the selected
bell schedule. The editing method is the same as the operations of adding a new bell schedule.
Delete a bell
On the All Bell Schedules interface, tap the required bell schedule, and tap Delete, and then tap Yes to
delete the selected bell.