LB330 Parking Barrier User Manual User Manual LB330 Parking Barrier Date: June 2022 Doc Version: 1.0 English Thank you for choosing our product. Please read the instructions carefully before operation. Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative www.zkteco.com. Pa g e |1 Copyright© ZKTECO CO., LTD. All rights reserved.
LB330 Parking Barrier User Manual Copyright © 2022 ZKTECO CO., LTD. All rights reserved. Without the prior written consent of ZKTeco, no portion of this manual can be copied or forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries (hereinafter the "Company" or "ZKTeco"). Trademark is a registered trademark of ZKTeco. Other trademarks involved in this manual are owned by their respective owners.
LB330 Parking Barrier User Manual ZKTeco does not assume responsibility for any errors or omissions in the information or documents which are referenced by or linked to this manual. The entire risk as to the results and performance obtained from using the information is assumed by the user.
LB330 Parking Barrier User Manual About the Company manufacturers of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/ floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks. Our security solutions are multi-lingual and localized in over 18 different languages.
LB330 Parking Barrier User Manual Document Conventions Conventions used in this manual are listed below: GUI Conventions For Device Convention <> Description Button or key names for devices. For example, press . Window names, menu items, data table, and field names are inside [] square brackets. For example, pop up the [New User] window . Multi-level menus are separated by forwarding slashes. For example, / [File/ Create/ Folder].
LB330 Parking Barrier User Manual Table of Contents 1 OVERVIEW ........................................................................................................................... 8 2 FEATURES AND FUNCTIONALITIES ................................................................................... 8 3 APPEARANCE AND DIMENSIONS ...................................................................................... 9 4 SPECIFICATIONS................................................................
LB330 Parking Barrier 9 User Manual TRANSPORTATION AND STORAGE ................................................................................. 21 Pa g e |7 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
LB330 Parking Barrier User Manual 1 Overview The LB330 is intended for use in small parking spaces, such as those for two-wheelers and small cars. It is a low -cost barrier with a high-performance DC brushless motor and two arm lengths of 1.5 and 2 meters, as well as a spherical type of boom arm. It also features inbuilt LED lights mostly night lights that turn on when there is a dark light condition; this is controlled by a sensor that detects low light.
LB330 Parking Barrier User Manual 3 Appearance and Dimensions Pa g e |9 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
LB330 Parking Barrier User Manual 4 Specifications Model LB330 Operating Speed 3s to 5s (Configurable) Boom Length 2m Boom Type Round Boom with LED Light Chassis Dimensions (L*W* H) 140*110*812 (mm) Weight 12Kg Motor Type 24V DC Brushless Motor Output Power 40W Output Current 2A Working Voltage DC 24V Power Supply AC 220V, 50Hz Operating Temperature -30°C to +60°C MCBF 1 million times Remote Control Distance 30m Operating Humidity 90%RH Pa g e |1 0 Copyright©2022 ZKTECO CO.
LB330 Parking Barrier User Manual 5 Installation Procedure Installation Precautions 1. Install the parking barrier on a flat surface. A cement foundation is required before installation if the ground is not solid and flat. 2. It is possible to reduce the length of the boom, but it cannot be increased. After the boom has been cut, it is important to set the spring balance again to achieve a new balance. The bottom of the spring contains two plastic nuts designed to adjust the new balance. 3.
LB330 Parking Barrier User Manual Installation of the Base and the Casing 1. Remove the four screws from the casing and the base as shown in the illustration. 2. Make sure the wire slot in the centre of the base is pre-opened. 3. The base has a downward opening. Fix the location with the expansion screw M10 x 120 after identifying it. 4. Place the casing on the base and install and tighten the four screws. The barrier's base is shown in the figure below : Pa g e |1 2 Copyright©2022 ZKTECO CO.
LB330 Parking Barrier User Manual Boom Arm Installation 5.4.1 Boom Arm Installation Procedure 1. Install the handlebar head: Make sure the flat key on the main shaft is aligned with the key notch on the handlebar head, then gently tap the handlebar head in place. Please see the figure below . 2. Install the centre screw and tighten it. 3. Attach the boom arm to the boom holder's head. 4. Install the remaining two screws and tighten them. 5. Connect the LED light's power cord.
LB330 Parking Barrier User Manual 6 Main Control Board Instructions 1. Before you begin wiring, make sure the power supply is turned off. 2. Make sure that the terminals are securely fastened and that the wiring is secure. Control Board External Product Requirement External product requirements for the control board are: Power supply -24V/ 4 to 10 A; Motor type: 24DC Brushless motor. Vehicle detector or 12V radar ground sensor.
LB330 Parking Barrier User Manual Main control Board Operation 6.3.1 Self-inspection Learning Switch Barrier Limit Method: 1. Long press the "key" of the control board for 2 seconds after it begins normally ("190" is displayed). The main board display value decreases as the barrier moves in the direction of closing the gate. The main board display returns to " 190 " when the motor reaches the closing limit, and the closing self-check is completed. 2.
LB330 Parking Barrier User Manual Parameter Settings Description - - - - - - - - - - - - - - - - - - - Pa g e |1 6 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
LB330 Parking Barrier User Manual - - - - - - - - - - - - - - - Pa g e |1 7 - - Copyright©2022 ZKTECO CO., LTD. All rights reserved.
LB330 Parking Barrier User Manual - - - - - - - - - - - Pa g e |1 8 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
LB330 Parking Barrier User Manual - - - - - Remote Control Pairing and Unpairing 6.5.1 Remote Control Pairing: 1. Long press Menu , then Long press the "Menu" button to enter the menu, select the L-F option, click the "Menu" button to display 000, and then enter the remote-control setting. 2. Press the remote control "Any key" and the main board will beep once, and the display will change to "L-F" to match the remote control successfully. 3.
LB330 Parking Barrier User Manual Reset 1. Long press the "Confirm " button on the main board and wait for the buzzer to beep three times before releasing it. All parameters will be reset to their factory default values at this time. 7 Troubleshooting N0 Failure Description 1 If there is a power failure. 2 The automatic function cannot lift the gate lever. The self-inspection is unsuccessful and the barriers are not operating normally.
LB330 Parking Barrier 8 User Manual Safety Precautions It is highly forbidden to hit the product using hard items. When using, please handle with care to avoid strong collisions with hard objects. Do not spill water or corrosive liquids on the surface of the product. The operation will not be possible whether the motor wire is connected appropriately, or the connection method is incorrect. If smoke or a strange smell comes from the product, disconnect the power immediately.
