Installation Guide

Figure 5 Figure 6

Step 5

Step 6

Front

Fasten the Wall Hanging Bar to the whole

machine as needed (as in Figure 5).

REMARKS:

When the interactive whiteboard with its own hanging bar cannot be eﬀectively

matched to the tripod, you should modify together with the wall mount plate, as

shown below.

Step 7

Refer to the following picture for the

ﬁnished product.

Hang the assembled whole machine onto the

Wall Bracket and lock the safety screw of the

Wall Hanging Bar (as in Figure 6).

Make sure the brakes are locked, this step

requires at least 2 professionals to complete.

Attach the wall mount plate on the wall bracket.

Hang the interactive whiteboard on the wall mount plate and lock the safety bolt.

Front

Make sure the side of

the wall plate with

the locking holes is

the front side.

ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China.

Phone: +86 769 - 82109991 Fax: +86 755 - 89602394

ZKTECO CO.,LTD. www.zkteco.com