User's Manual
Table Of Contents
- Read Before Use
- Structure
- Basic Function
- How to Use
- Enter Main Menu
- Register User [Main Menu > New User]
- Manage Users [Main Menu > User Mgt.]
- Autolock Time [Main Menu > System > Operate Setting > Autolock Time]
- Language Setting [Main Menu > System > Operate Setting > Language]
- Verification Mode [Main Menu > System > Operate Setting > Verify Mode]
- Operate Alarm [Main Menu > System > Operate Setting > Operate Alarm]
- Normal Open Mode [Main Menu > System > Operate Setting > Normal Open]
- Date/Time Setting [Main Menu > System > Date/Time]
- Advanced Options [Main Menu > System > Advanced Options]
- Network Setting (optional) [Main Menu > System > Network Setting]
- Upgrade Firmware [Main Menu > U-Disk >Upgrade Firmware]
- Data Management [Main Menu > Data]
- System Information [Main Menu > System Info]
6 HBL100B User Ma nual
B
asic Function
User Introduction
G
roup Verification Mode Function
Admin
Face
Fingerprint
Passcode
Card
Access to menu
Open the door
Nor
mal User Open the door
N
otes:
1) Fingerprint recognition is only available for the HBL100 series products.
2) The maximum face/fingerprint/passcode/card capacity is 100 for all groups.
Initialization
I
nitializing the lock means all data will be deleted and restored to factory default setting.
Operation steps: Touch the fingerprint sensor or wake up key to wake up the screen, and press
the reset button on the back body of the lock until the screen prompts for initialization. Then click
[OK] to complete the initialization.