Installation Guide

There are two methods to install the Outdoor assembly.
v Method 1: Installing with 3M Tapes
v Method 2: Installing with Stud
1
Paste a 3M Tape on the Mounting
plate of Outdoor assembly.
2
21
4
4. Installation of Outdoor assembly
1) Make sure the highlighted Spindle is in the horizontal
position, as shown.
2) Route the cable through the opening the bolt.below
3) Attach the Outdoor assembly to the door by inserting it
through the Latch.
Move the Gasket away and fix the
Stud on the Mounting plate of
Outdoor assembly.
1) Make sure the highlighted Spindle is in the horizontal
position, as shown.
2) Route the cable through the opening the bolt.below
3) Attach the Outdoor assembly to the door by inserting it
through the Latch.