User's Manual

User Manual
P a g e | 34 Copyright©2022 ZKTECO CO., LTD. All rights reserve
d.
Function Description
Function Descriptions
Reboot Click Reboot, click Sure in the confirmation box that pops up, and the device reboots.
Restore Default
Parameters
Click
Restore Default Parameters
, click
Sure
in the confirmation box that pops up, and
the device reboots. All settings are restored to default except network parameters and
access connection deviceinformation are notreset.
Factory Reset
Click
Factory Reset
, click
Sure
in the confirmation box that pops up, and the device
reboots. All information onthe device is restored to the factory.
System Update
Click
System Update
to enter the system upgrade interface, click
Detect firmware
version, if the correct firmware version is detected, then you can click Update. The
device enters the upgrade interface, the progress bar shows the current upgrade
progress, and the device reboots automatically after the system upgrade is
successful. After reboot, check the device function and version date as expected.