User's Manual
Table Of Contents
- 1 Safety Measures
- 2 Electrical Safety
- 3 Operation Safety
- 4 Instruction for Use
- 5 Main Menu
- 6 User Management
- 7 User Role
- 8 Communication Settings
- 9 System Settings
- 10 Personalize Settings
- 11 Data Management
- 12 Access Control
- 13 Attendance Search
- 14 Autotest
- 15 System Information
- 16 Connect to ZKBio Access Software
- Appendix 1
- Appendix 2
- Eco-friendly Operation
SpeedFace-V3L User Manual
Page | 67 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Authentication
Timeout(s)
The amount of time taken to display a successful
verification message.
Valid value: 1 to 9 seconds.
Face comparison
Interval(s)
After the interval identifying is clicked (selected),
for example, if the comparison interval is set to 5
seconds, then the face recognition will verify the
face every 5 seconds. Valid value: 0 to 9 seconds.
0 means continuous identifying, 1 to 9 means
identifying at intervals.
Face Parameters 9.3
Tap Face on the System interface to go to the Face parameter settings.