User's Manual
Table Of Contents
- 1 Safety Measures
- 2 Electrical Safety
- 3 Operation Safety
- 4 Instruction for Use
- 5 Main Menu
- 6 User Management
- 7 User Role
- 8 Communication Settings
- 9 System Settings
- 10 Personalize Settings
- 11 Data Management
- 12 Access Control
- 13 Attendance Search
- 14 Autotest
- 15 System Information
- 16 Connect to ZKBio Access Software
- Appendix 1
- Appendix 2
- Eco-friendly Operation
SpeedFace-V3L User Manual
Page | 64 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Tap Date and Time Auto Sync to enable automatic time synchronization
based on the service address you enter.
Tap Manual Date and Time to manually set the date and time and then
tap to Confirm and save.
Tap Select Time Zone to manually select the time zone where the device
is located.
Enable or disable this format by tapping 24-Hour Time. If enabled, then
select the Date Format to set the date.
Tap Daylight Saving Time to enable or disable the function. If enabled,
tap Daylight Saving Mode to select a daylight-saving mode and then
tap Daylight Saving Setup to set the switch time.