User's Manual
Table Of Contents
- 1 Safety Measures
- 2 Electrical Safety
- 3 Operation Safety
- 4 Instruction for Use
- 5 Main Menu
- 6 User Management
- 7 User Role
- 8 Communication Settings
- 9 System Settings
- 10 Personalize Settings
- 11 Data Management
- 12 Access Control
- 13 Attendance Search
- 14 Autotest
- 15 System Information
- 16 Connect to ZKBio Access Software
- Appendix 1
- Appendix 2
- Eco-friendly Operation
SpeedFace-V3L User Manual
Page | 52 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Wi-Fi Settings 8.4
The device provides a Wi-Fi module, which can be built-in within the device
module or can be externally connected.
The Wi-Fi module enables data transmission via Wi-Fi (Wireless Fidelity) and
establishes a wireless network environment. Wi-Fi is enabled by default in the
device. If you don't need to use the Wi-Fi network, you can toggle the Wi-Fi to
disable the button.
Tap Wi-Fi Settings on the Comm. Settings interface to configure the Wi-Fi
settings.
Searching the Wi-Fi Network
WIFI is enabled in the device by default. Toggle the button to
enable or disable WIFI.
Once the Wi-Fi is turned on, the device will search for the available Wi-Fi
within the network range.
Tap on the required Wi-Fi name from the available list and input the
correct password in the password interface, and then tap Connect to
Wi-Fi (OK).