User's Manual
Table Of Contents
- 1 Safety Measures
- 2 Electrical Safety
- 3 Operation Safety
- 4 Instruction for Use
- 5 Main Menu
- 6 User Management
- 7 User Role
- 8 Communication Settings
- 9 System Settings
- 10 Personalize Settings
- 11 Data Management
- 12 Access Control
- 13 Attendance Search
- 14 Autotest
- 15 System Information
- 16 Connect to ZKBio Access Software
- Appendix 1
- Appendix 2
- Eco-friendly Operation
SpeedFace-V3L User Manual
Page | 101 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
In/Out Anti-passback: In this case, a user can
check-in only if the last record is a check-out or
the user can check-out only if the last record is a
check-in otherwise the alarm is triggered.
Duress Options Settings 12.6
Once a user activates the duress verification function with a specific
authentication method(s), and when he/she is under coercion and
authenticates using duress verification, the device unlocks the door as usual. At
the same time, a signal is sent to trigger the alarm as well.
On the Access Control interface, tap Duress Options to configure the duress
settings.