User manual

201 Circle Drive N, Suite 116 Piscataway, NJ 08854 Tel: [phone] Fax: [phone]
www.zkaccess.com
Shows the list of commands sent to the device by the current system. If the return value is ≥ 0, execution is successful. If it is a
negative, the execution failed.
Clear Command List: Click it to open the Confirm interface. Click [OK] to clear all items in the list of commands sent by the
server;
Delete: Tick the check box before the command to be deleted and click [Delete]. Confirm to delete the command.
2. Device Monitoring
By default it monitors all devices with the current user’s level, and lists the operation information of the devices: device name,
serial number, operation type, current status, commands to be executed, and progress, etc.
5.4 Daylight Saving Time
DST, also called Daylight Saving Time, is a system that prescribes the local time setting principle in order to save energy. The
unified time adopted during the system date is called “DST”. Usually, the time will be one hour forward in summer. It
encourages people to go to bed early and wake up early in order to reduce lighting and save energy. In autumn, the time will
be recovered. The regulations are different in different countries.
To meet the demand of DST, a special option can be customized on this system. Set the time one hour forward at XX (minute)
XX (hour) XX (day) XX (month), and set the time one hour backward at XX (minute) XX (hour) XX (day) XX (month) if
necessary.
 Note: If a DST setting is in use, it cannot be deleted. First stop the DST then delete it again.
1. DST Adding:
Mode 1: Set as “Month-day hour: minute” format, Start Time and End Time is needed. For example, the Start Time can be set
as “3-11 00:00”, when the start time arrives, the system will be advanced one hour. When the end time arrives, the system will