User manual

3.2.6 Duress Alarm Parameters
The ngerprint reader will trigger alarm system after a duress ngerprint is veri ed sucess-
fully. It is advisable :
1 to use different ngers to do daily clocking mechanism and to trigger duress alarm
2 to use different veri cation to do daily clocking mechanism and to trigger duress
alarm.
3.2.7 De ne a Duress Finger
If users would like to use different ngers for daily clocking and to trigger duress alarm,
users must enrol with more than 1 ngerprint (2 or above).
Example : index nger for daily clocking activities and thumb as duress nger.
When duress nger is used for veri cation, it will trigger alarm system as well. Administra-
tor does not need to enable any of the veri cation methods in Duress Alarm Param-
eters.
Summary
* Enrol 2x or more nger-
prints to assign a ngerprint.
* Assign index nger for
daily clocking, and thumb
for duress nger.
13
Press to select DURESS ALARM SETTINGS
• Press
Press to select value eld
Press to change options
Help key :
Select [Yes] to enable. Hold the for 3 second followed
by the ngerprint veri cation. Successful veri cation
will trigger alarm system.
1:1 Trig :
Select [Yes] to enable. Enter user ID followed by
ngerprint veri cation to trigger alarm system. During
daily clocking mechanism, all users use 1:N ngerprint
veri cation. All 1: N ngerprint veri cation process will
trigger alarm system.
1:N Trig :
Select [Yes] to enable. Place nger on scanner for
ngerprint veri cation to trigger alarm system. During
daily clocking mechanism, all users use 1:1 ngerprint
veri cation. All 1:N ngerprint veri cation process will
trigger alarm system.
Pwd Trig :
Select [Yes] to enable. Enter user ID and password for
veri cation to trigger alarm system. During daily clock-
ing mechanism, all users use ngerprint veri cation.
Any password veri cation process will trigger alarm
system.
Alarm delay :
To delay the reader to trigger alarm system after
veri cation.
Press to save
alar
m
ers.