User guide

S900 User Guide

If the S900 is operating in stand-alone mode, (where no 3

party access

control panel exists) assign users’ security privileges directly on the

S900.

Note: If using the S900 with a 3

party Wiegand access control panel,

users’ security privileges will be maintained by the access control panel

and NOT the S900.

Step 3: After enrolling user(s), verify that his/her enrolled fingerprint or

password is recognized by the S900.

Step 4

: Configure the S900 communication settings and then download

the users’ newly enrolled fingerprints from the S900 onto a computer.

Data can be transmitted via TCP/IP or by using a USB flash drive.

Note:

Always back up the fingerprint templates on a computer or

removable media source. Having a “template backup” can

potentially save you a lot of time. If the S900 fails or is vandalized,

having a “backup” eliminates the need of having to re-enroll all

your users.

Step 5

：Verify that S900 displays the correct day and time.