User's Guide

- 5 -
➢ The power adapter is recommended to use DC12V / 3A specification. After the reading
head is energized, the buzzer will ring.
➢ Open Demo, click Connect. Display Connection Successful. Indicates that the
machine has successfully connected with the Demo.
➢ Output Time: Sets the time interval between adjacent wigan data.
➢ Reader Indicator: Set whether the buzzer will ring when the machine is powered on
and the card is brushed.
➢ Work Mode: Set the working mode of the machine, including frequent reading mode,
trigger mode, and trigger mode to set the trigger once and how long to read.
➢ RF Settings: Set the RF parameters of the machine, including power, spectrum, and
power range of 18-26dbm.
➢ Wiegand Format: Set the output format of the machine wiegand.
➢ Tag Reading Interval: Set the machine read card interval. The card reading interval is
the time when the card is read within the card swiping range and the second time when
the card is read outside the card swiping range.
3 Reader Installation
Refer to the schematic diagram when installing the Reader, install the Reader on the bracket and
adjust the Angle according to the actual card swiping effect.
Notice：
➢ Please keep away from strong magnetic field when reading head works.
➢ Adjacent readers should not be installed face to face or back. Adjacent readers should be in the
RF area of another reader.