U1000F UHF Integrated Machine User Guide Version: 1.0 Date：2020.03.
Contents 1 Overview ...................................................................................................................................... - 4 2 Read Configuration Parameters .................................................................................................. - 4 3 Reader Installation ......................................................................................................................
FCC ID: 2AKARU1000F NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
1 Overview This article mainly introduces the operation method of setting U1000F UHF Integrated Machine DEMO software through USB connection. 2 Read Configuration Parameters 1.Open UHF Reader Demo, click Connect. 2.Click Read Configuration to view the U1000F UHF Integrated Machine configuration parameter information. 3.
➢ The power adapter is recommended to use DC12V / 3A specification. After the reading head is energized, the buzzer will ring. ➢ Open Demo, click Connect. Display Connection Successful. Indicates that the machine has successfully connected with the Demo. ➢ Output Time: Sets the time interval between adjacent wigan data. ➢ Reader Indicator: Set whether the buzzer will ring when the machine is powered on and the card is brushed.
