Owner's Manual

to take a set. The shaking procedure will relieve any set that may have occurred. After shaking,
place the laser on the platform and re-check the Y-axis calibration. Make any further
adjustments following the above procedure.
Calibration is now complete.
Pull firmly on tab at base of door to remove.
Install batteries according to the
instructions molded on the battery
holder.
Hook battery door at top of housing and push firmly at base of door to latch.
Receiver
When your work takes you outdoors, a receiver is
essential. No true rotating laser can be used outdoors
without a receiver as it would not be safe or legal to
put out enough laser power to make the rotating beam
visible in sunlight. The Auto receiver provides
excellent functionality at a great price.
Receiving range 500ft (150m)
Reception height 1.5" (38 mm)
Three channel LED front display
Selectable tone (hi, low, off)
Battery life 70 hrs. (2 AA batteries)
90° reception angle
One year warranty
Optional rechargeable battery kit
LaserVision Auto file:///Volumes/Macintosh HD/Users/zirconcorporation/Docume...
5 of 10 10/22/12 12:10 PM