Installation Guide

© 2020. ACT, ColorTrip, DeepScan, LoLevel, MetalliWarning, SpotLite, SuperScan, Target Control, TC, WireWarning, and Zircon are all trademarks or registered trademarks of Zircon Corporation • GF-4452 Rev A 11/20
Featuring new, revolutionary Target Control
™
(TC
™
) Level 1 Technology. The Zircon
®
SuperScan
™
M2 advanced
stud finder is tuned to find clean, wood studs while filtering out metallic false positive objects, such as plumbing,
conduit, straps, brackets, or ducts, hiding behind surfaces. The LoLevel
™
and MetalliWarning
™
Indicators alert to the
presence of dangerous, deep, less dense false positives, and metal targets, reducing the chance of accidentally
drilling into a piece of metal or plastic pipe. With the addition of Zircon’s proprietary DeepScan
®
mode, users can
increase scanning power when necessary, making for a more robust and multifunctional tool.
The SuperScan
™
M2 offers three distinct detection modes - TC
™
, StudScan, and DeepScan
®
. A 2-mode switch
makes it easy to toggle between functions, while the ColorTrip
®
Display conveniently details information.
The screen illuminates pale blue in TC
™
mode and locates the center, edges, and direction of wood studs, while
also enabling the user to identify ‘safe-to-drill’ zones by utilizing the new ‘Trust but Verify’ technique.
When TC
™
mode is off, the tool will perform in StudScan mode indicating the center, edges, and direction of both
wood and metal studs. DeepScan
®
mode doubles the scanning depth to reach deeper targets beneath extra layers
of drywall or paneling. The Target Spotlight illuminates on screen when the center of a stud is found and SpotLite
®
Pointer shines on the scanned surface.
• NEW! – Target Control
™
(TC
™
) Mode locates the center, edges, and direction of wood studs, and not
metal, up to ¾ in. (19 mm) deep behind surfaces. Identifies ‘safe-to-drill’ zones between adjacent drywall
screws, nails, or protector plates
• StudScan Mode locates center, edges, and direction of wood and metal studs up to ¾ in. (19 mm) deep
• DeepScan
®
Mode doubles the scan depth of wood and metal studs up to 1½ in. (38 mm) deep
• WireWarning
®
Detection alerts to live, unshielded AC wires up to 2 in. (50 mm) deep
• LoLevel
™
Indicator displays low (weak) signal objects, such as plastic water pipes while in TC
™
mode
• Signal Strength Indicator helps distinguish between shallow and deep targets while in StudScan
and DeepScan
®
modes
• MetalliWarning
™
Indicator turns on when metal objects are detected in all modes
• ACT
™
(Auto Correcting Technology) automatically corrects common errors, such as when scanning begins
over a stud
• Target Spotlight illuminates on screen when stud center is detected
• ColorTrip
®
Display illuminates pale blue in TC
™
mode, green in DeepScan
®
mode, and red to alert the presence
of live AC electricity
• SpotLite
®
Pointer shines an arrow-shaped light on the scanned surface to indicate the center of a stud
• “V” marker groove enables accurate marking of stud location
• Low Battery Indicator for optimum performance (9V battery required, not included)
Dimensions 7.9 in. x 3.5 in. x 1.9 in. (200 mm x 89 mm x 48 mm)
Weight
8.0 oz. (226 g) (no battery)
Battery Type
9V alkaline battery required, not included
Position Accuracy
Up to a depth of ¾ in. (19 mm) typically, within
1
⁄8 in. (3 mm)
Depth Target Control
™
mode: up to ¾ in. (19 mm)
Stud Scan mode: up to ¾ in. (19 mm)
DeepScan
®
mode: up to 1½ in. (38 mm)
WireWarning
®
Position
Accuracy
Typically, 120-230V at 50-60Hz within 6 in.
(150 mm) of hot unshielded wire in drywall
WireWarning
®
Depth Up to 2 in. (50 mm) deep
Operating Temperature 40° to 120°F (4° to 49°C)
Storage Temperature 20° to 140°F (-7° to 60°C)
Humidity 5-95% RH (non-condensing)
Water Resistance Splash and water resistant, not waterproof
*NOTE: USE ONLY IN ACCORDANCE WITH SUPERSCAN
TM
M2 INSTRUCTIONS.
See tool’s instructions for more information. Sensing depth and accuracy can vary due to
moisture, content of materials, wall texture, paint, etc. Indoor use only.
|
zircon.com
Stud Finder
1580 Dell Avenue
|
Campbell, CA 95008
|
[e-mail]
T: 1.408.963.4550
|
F: 1.408.963.4597
WireWarning
®
Detection
DeepScan
®
Mode
MetalliWarning
™
Indicator
LoLevel
™
/Signal Strength
Indicator
Stud Center Finding
For a complete list of applicable patent(s) or pending patent(s), visit www.zircon.com/trademarks-patents/
Specifications
SuperScan
™
M2
|
Advanced Stud Finder
Target Control
™
Technology