Technical Specifications
SPECIFICATIONS
Dimensions 6.07 in. H x 2.70 in. W x 1.18 in. D
(154 mm x 6 8 mm x 30 mm)
Weight 4.1 oz. (116 g) without battery
Battery Type 9-V alkaline (not included)
Position Up to a depth of ¾ in. (19 mm):
Accuracy* typically within ¹»
8 in. (3 mm) using
the dual scan and mark procedure
Up to a depth of 1 ½ in. (38 mm):
typically within ³»
16 in. (5 mm) using
the dual scan and mark procedure
Depth* Stud Scan mode: up to ¾ in.
(19 mm)
DeepScan
®
mode: up to 1-½ in.
(38 mm)
AC Position Typically 90-250 V at 50-60 Hz
Accuracy* within 6 in. (152 mm) of a hot
unshielded wire in drywall
AC Depth* In typical wall with Romex™ wiring,
wire can be detected up to
2 in. (51 mm) deep
Operating 20° to 120°F (-7° to 49°C)
Temperature
Storage -20° to 150°F (-29° to 66°C)
Temperature
Humidity 80% RH (noncondensing)
Water Splash and water resistant, not
Resistance waterproof
*NOTE: See tool's instructions for more information.
Sensing depth and accuracy can vary due to moisture,
content of materials, wall texture, paint, etc.
Deep-Scanning Stud Finder with
SpotLite
®
Pointing System and
WireWarning
®
Detection
StudSensor
™
Pro SL-AC quickly and
easily locates the edges of wood and
metal studs and joists behind walls,
ÀRRUVDQGFHLOLQJV7KHSDWHQWHG
SpotLite
®
Pointing System shines a
beam of light on the wall to identify
the target, and WireWarning
®
detection
indicates the presence of live AC
voltage. Its tough, ergonomic housing
withstands everyday jobsite use.
Stud Scan mode locates the edges
of wood or metal studs up to
¾ inch (19 mm) deep
DeepScan
®
mode doubles the
scanning depth to 1½ inches
(38 mm)
Red LEDs light up every time a stud
edge is approached
Patented SpotLite
®
Pointing System,
an audio alert, and a green LED
signals when the stud edge is
reached
WireWarning
®
detection indicates
the presence of live, unshielded
electrical wiring up to 2 inches deep
Should scanning begin over a stud,
Zircon's patented "over-the-stud"
indicator alerts the user to start the
scan in a new location
Patented TruCal
®
technology
calibrates to any wall's density and
a steady green LED TruCal
®
light
alerts the user when the tool is
ready and calibrated
EDGE FINDER StudSensor
™
Pro SL-AC
=,5&21&25325$7,21'(//$9(18(&$03%(//&$86$(0$,/,1)2#=,5&21&20
©
'HHS6FDQ6SRW/LWH6WXG6HQVRU7UX&DO:LUH:DUQLQJDQG=LUFRQDUHWUDGHPDUNVRUUHJLVWHUHGWUDGHPDUNVRI=LUFRQ&RUSRUDWLRQ&1