Datasheet

MultiScanner
®
Pro SL Technical Information
Dimensions 6.38 in. H x 3.07 in. W x 1.34 in. D
(162 mm x 78 mm x 34 mm)
Weight 6.5 oz. (184 g) without battery
Battery type 9-V alkaline (not included)
Estimated battery life 2 years at 10 minutes per day with alkaline battery
Position accuracy Stud Scan mode: typically within
1
⁄
8
in. (3 mm) using the dual
scan and mark procedure
DeepScan mode: typically within
3
⁄
16
in. (5 mm) using the
same procedure
Metal Scan mode: typically within
1
⁄
2
in. (13 mm)
Depth Up to
3
⁄
4
in. (19 mm) in Stud Scan mode
Up to 1
1
⁄
2
in. (38 mm) in DeepScan mode
Up to 1
1
⁄
2
in. (38 mm) for copper in Metal Scan mode
Up to 3 in. (76 mm) deep for rebar in Metal Scan mode
NOTE: Sensing depth and edge detection can vary due to
moisture content of materials, wall texture, paint, etc.
AC position accuracy Typically 90–250 V at 50–60 Hz within 6 in. (150 mm)
of a hot unshielded wire
AC depth Typical depth of 2 in. (50 mm)
Operating temperature 20° to 120°F (-7° to 49°C)
Storage temperature -20° to 150°F (-29° to 66°C)
Humidity 80% RH (noncondensing)
Water resistance Splash and water resistant, not waterproof
Order Information Part Number UPC
MultiScanner
®
Pro SL 56990 0 42186 56987 2
1580 Dell Avenue
Campbell, CA 95008-6992
Tel: [phone] or 408-963-4550
Fax: [phone]
E-mail: [e-mail]
©2004 Zircon Corporation • C/N 0470 Rev B 07/04
SpotLite
®
Pointing
System
DeepScan
®
Over-the-
Stud
Warning
Ergonomic
Design
PATENTED
PATENTED