MSDS

POLYONE CORPORATION
MATERIAL SAFETY DATA SHEET
GEON E1501 EX WHITE 1564
Version Number 1.11
Revision Date 10/05/2012
Page 4 of 7
Print Date 10/6/2012
4/7
Components
Value
Exposure time
Exposure type
List:
Calcium carbonate
5 mg/m3
PEL:
Respirable fraction.
OSHA Z1
15 mg/m3
PEL:
Total dust.
OSHA Z1
10 mg/m3
Time Weighted Average
(TWA):
MX OEL
20 mg/m3
Short Term Exposure Limit
(STEL):
MX OEL
Calcium stearate
10 mg/m3
Time Weighted Average
(TWA):
ACGIH
Titanium dioxide
10 mg/m3
Time Weighted Average
(TWA):
ACGIH
15 mg/m3
PEL:
Total dust.
OSHA Z1
10 mg/m3
Time Weighted Average
(TWA):
Total dust.
OSHA Z1A
10 mg/m3
Time Weighted Average
(TWA):
as Ti
MX OEL
20 mg/m3
Short Term Exposure Limit
(STEL):
as Ti
MX OEL
9. PHYSICAL AND CHEMICAL PROPERTIES
Form
:
solid
Evaporation rate
:
Not applicable
Appearance
:
pellets, powder
Specific Gravity
:
Not determined
Colour
:
WHITE
Bulk density
:
Not established
Odour
:
very faint
Vapour pressure
:
not applicable
Melting point/range
:
Not determined
Vapour density
:
not applicable
Boiling Point:
:
not applicable
pH
:
not applicable
Water solubility
:
insoluble
10. STABILITY AND REACTIVITY
Stability
:
The product is stable if stored and handled as prescribed.
Hazardous Polymerization
:
Will not occur.
Conditions to avoid
:
Keep away from oxidizing agents and open flame. To avoid thermal
decomposition, do not overheat.
Incompatible Materials
:
Incompatible with strong acids and oxidizing agents., Avoid contact
with acetal homopolymers and acetal copolymers during processing.
Hazardous decomposition
products
:
Carbon dioxide (CO2), carbon monoxide (CO), oxides of nitrogen
(NOx), other hazardous materials, and smoke are all possible.
Prolonged heating (approximately 30 minutes or more) above 392 °F
(200 °C) or short term heating at 482 °F (250 °C) may result in
product decomposition and evolution of carbon monoxide and
hydrogen chloride.
11. TOXICOLOGICAL INFORMATION