MSDS

POLYONE CORPORATION
MATERIAL SAFETY DATA SHEET
GEON E1501 EX WHITE 1564
Version Number 1.11
Revision Date 10/05/2012
Page 2 of 7
Print Date 10/6/2012
2/7
Chronic exposure
:
Refer to Section 11 for Toxicological Information.
Medical Conditions
Aggravated by Exposure:
:
None known.
4. FIRST AID MEASURES
Inhalation
:
Move to fresh air in case of accidental inhalation of fumes from
overheating or combustion. When symptoms persist or in all cases of
doubt seek medical advice.
Ingestion
:
Do not induce vomiting without medical advice. When symptoms
persist or in all cases of doubt seek medical advice.
Eyes
:
Rinse immediately with plenty of water, also under the eyelids, for at
least 15 minutes. If eye irritation persists, seek medical attention.
Skin
:
Wash off with soap and plenty of water. If skin irritation persists
seek medical attention.
5. FIREFIGHTING MEASURES
Flash point
:
not applicable
Flammable Limits
Upper explosion limit
:
not applicable
Lower explosion limit
:
not applicable
Auto-ignition temperature
:
Not applicable
Suitable extinguishing media
:
Carbon dioxide blanket, Water spray, Dry powder, Foam.
Special Fire Fighting
Procedures
:
Fullface self-contained breathing apparatus (SCBA) used in positive
pressure mode should be worn to prevent inhalation of airborne
contaminants.
Unusual Fire/Explosion
Hazards
:
May emit Hydrogen Chloride (HCl) or Carbon Monoxide (CO) under
fire conditions. Carbon dioxide (CO2), carbon monoxide (CO),
oxides of nitrogen (NOx), other hazardous materials, and smoke are
all possible.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions
:
Wear appropriate personal protection during cleanup, such as
impervious gloves, boots and coveralls.
Environmental precautions
:
Should not be released into the environment. The product should not
be allowed to enter drains, water courses or the soil.
Methods for cleaning up
:
Clean up promptly by sweeping or vacuum. Package all material in
plastic, cardboard or metal containers for disposal.