Specifications

7
…assembly/disassembly continued,
Figure 6.
Figure 7.
Figure 8.
Figure 9.
Figure 10.
Figure 6. Loosen tiller adjustment knob, raise the
tiller to the desired angle, and then retighten the tiller
adjustment knob. Unlock tiller lock located at the
bottom front of the scooter tiller by pushing and
turning knob. (WARNING scooter will not turn if lock
is not released. The tiller lock should only be locked
during transportation of scooter)
Figure 7. Carefully place the battery box into
battery compartment. Lightly press down on the
front and rear of the battery box to ensure that the
front to rear power connections have engaged.
Figure 8. Insert the chrome seat post extension into
the seat post. Insert the seat post pin at the desired
seat height.
Figure 9. Install the seat by lowering the seat into
the seat post extension and rotating until it locks into
the correct position. Note: The scooter seat rotates
by pulling on the seat release lever (located at the
right of the seat) while rotating the seat in either
direction.
Figure 10. The fully assembled Zip’r Scooter.
Disassembly of your scooter can be accomplished
by following the above steps in reverse order.
PDF created with pdfFactory trial version www.pdffactory.com