Specifications

CARE AND MAINTENANCE

Your Zip’r3 requires a minimal amount of maintenance. The following are the maintenance items

that should be followed to ensure that your scooter is safe and reliable.

Daily

• Charge your battery daily if your scooter is used for more than twenty minutes.

• Always store your scooter in a warm and dry environment.

Cleaning

• The scooter shroud is made from durable ABS plastic with a high gloss type finish.

Therefore, the body can be cleaned like a car (cool water and mild soap to remove

dirt/oils). DO NOT SPRAY THE ENTIRE SCOOTER WITH WATER AS THIS WILL

DAMAGE ELECTRICAL PARTS AND UPHOLSTERY. A light application of car wax will

help the shroud retain its high gloss.

• Use a rubber conditioner on your scooter’s tire sidewalls to help preserve them.

• Bumpers and trim benefit from an occasional application of rubber or vinyl conditioner.

HAZARD WARNING

• DO NOT APPLY RUBBER CONDITIONER ON TIRE TREAD; THIS MAY CAUSE THE

TIRES TO BECOME DANGEROUSLY SLIPPERY. ALSO DO NOT USE A RUBBER OR

VINYL CONDITIONER ON THE SCOOTER’S VINYL SEAT OR FLOORBOARD. THEY

WILL BECOME DANGEROUSLY SLIPPERY AND RESULT IN PERSONAL INJURY

AND/OR DAMAGE YOUR SCOOTER.

• ALWAYS PROTECT BATTERIES FROM FREEZING TEMPERATURES AND NEVER

CHARGE A FROZEN BATTERY. THIS DAMAGES THE BATTERY AND CAN CAUSE

PERSONAL INJURY.

Maintenance

• Regularly check your scooter tires for wear.

• Regularly check you scooter seat posts for wear.

• All axle bearings and motor/transaxle assembly are prelubricated, sealed and require no

subsequent lubrication.

• Keep the console, charger, battery, and electronics free of moisture.

• For prolonged storage, you may wish to place several boards under the frame of your

scooter to raise off of the ground. This reduces the possibility of flat spots developing on

the flat free tires.

PDF created with pdfFactory trial version www.pdffactory.com