Manual

1.6 SPECIFICATION
NPUT CHARACTERISTICS: M1S2-5400V4H / M1S2-5500V4H
A INPUT CHARACTERISTICS
1 VOLTAGE 90 264VAC FULL RANGE
2 FREQUENCY 47 63HZ
3 INPUT CURRENT 3A / 4A RMS FOR HIGH RANGE INPUT VOLTAGE;
6A / 8A RMS FOR LOW RANGE INPUT VOLTAGE
4 INRUSH CURRENT 20A MAX. FOR 132 VAC PER MODULE
40A MAX. FOR 264 VAC PER MODULE
B OUTPUT CHARACTERISTICS
OUTPUT OUTPUT CURRENT REGULATION OUTPUT RIPPLE
&
VOLTAGE MIN. MAX. LOAD LINE NOISE MAX. [P-P]
+5V 1 25 ±5% ±1% 50mV
+12V 2 33/41 ±5% ±1% 120mV
-12V 0 0.8 ±10% ±1% 120mV
+3.3V 1 25 ±5% ±1% 50mV
+5VSB 0.1 3.5 ±5% ±1% 50mV
REMARK: 1. TOTAL MAX OUTPUT OF +5V AND +3.3V NOT EXCEED 170W.
2. POWER MODULE TOTAL OUTPUT POWER NOT EXCEED 400W/500W
C SPECIFICATION

TEMPERATURE RANGE OPERATING 0 40 STORAGE -20 80

HOLD UP TIME 16mS MIN. AT FULL LOAD & 115 VAC INPUT VOLTAGE

DIELECTRIC WITHSTAND INPUT/OUTPUT 1500 VAC FOR 1 minute, INPUT TO
FRAME GROUND 1500 VAC FOR 1 MINUTE

EFFICIENCY 84% / 85% MAX.

POWER GOOD SIGNAL ON DELAY 100mS TO 500mS OFF DELAY 1ms

OVER POWER PROTECTION 110 150% MAX

OVER VOLTAGE PROTECTION +5V→5.8V 6.9V +3.3V→3.9V 4.6V
+12V→13.9V 16.4V

OVER CURRENT PROTECTION: +3.3V→27.5~37.5A, +5V→27.5~37.5A,
+12V→36.3~59.4A(400W) / +12V→45.1~67.5A(500W)

SHORT CIRCUIT: +12V, -12V, +3.3V, +5V, +5VSB

EMI : FCC CLASS A , CISPR 22 CLASS A

SAFETY UL 60950-1, CSA 22.2 NO.60950-1-03 1ST Edition , TUV IEC60950-1,
CCC

FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL