Owner manual

User Manual for Models HG2, HP2, PSM and PSL. Version 1.0
Page 13/17
INPUT CHARACTERISTICS: PSL-6A00V
 VOLTAGE: 90 ~ 264 VAC FULL RANGE.
 FREQUENCY: 47 ~ 63 Hz.
 STEADY-STATE CURRENT: 14/7A AT ANY LOW/HIGH RANGE INPUT VOLTAGE
 INRUSH CURRENT: 20A MAX. FOR 110 VAC , 40A MAX. FOR 220 VAC (AT 25 DEGREE C AMBIENT
COLD START)
 PFC: UP TO THE TARGET OF 95% @230V, FULL LOAD
OUTPUT CHARACTERISTICS:
OUTPUT CURRENT (A) REGULATION OUTPUT
VOLTAGE
MIN. MAX. LOAD LINE
OUTPUT RIPPLE &
NOISE MAX. [P-P]
+5V 1 25
250mV 1%
60mV
+12V1 1 50
600mV 1%
120mV
+12V2 1 50
600mV 1%
120mV
-12V 0 0.8
600mV 1%
120mV
+3.3V 1 25
165mV 1%
60mV
+5VSB 0.1 3.5
250mV 1%
60mV
REMARKS:
1. +5V AND +3.3V TOTAL MAX. POWER: 170W
2. +3.3V AND +5V AND +12V2 TOTAL MAX. POWER: 600W
3. TOTAL MAX. POWER: 1000W
SPECIFICATION:
 TEMPERATURE RANGE: OPERATING 0 -- 40 ; STORAGE TEMPERATURE: -20 – 80
 HOLD UP TIME: 18mS MINIMUM AT 90V FULL LOAD & NOMINAL INPUT VOLTAGE
 EFFICIENCY: 81%-86% TYPICAL AT 115V, FULL LOAD
 LEAKAGE CURRENT: 3.5 mA. MAX. AT NOMINAL VOLTAGE 264VAC
 POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
 OVER POWER PROTECTION: 110%~160%
 OVER VOLTAGE PROTECTION: +3.3V 3.6~4.3V, +5V 5.5~6.5V, +12V1 13.2~15.6V, +12V2
13.2~15.6V
 OVER CURRENT PROTECTION: +3.3V 27.5~37.5A, +5V 27.5~37.5A, +12V1 55~75A, +12V2
55~75A
 SHORT CIRCUIT PROTECTION: +3.3V, +5V, +12V1, +12V2, -12V
 SAFETY: TUV, CB, CCC, RFI/EMI STANDARDS
 EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
 COOLING: 8 0mm DC FANS
 I2C FEATURES (OPTIONAL)
 DIMENSION: 220 (D) x 150 (W) x 86 (H) mm