User's Manual

have been properly set and the mouse are working.

Battery Low

1. . Low-Battery is indicated by the illumination of the Mouse Scroll. Please replace the

battery when the LED lights up.

2. While the mouse is in sleep mode, please press any button or move the scroll wheel to

wake it up.

3. We recommend using alkaline batteries for the mouse.

4. You may need to reset the ID’s after replacing new batteries for the mouse.

Warning

Please be careful when resetting the ID’s for the mouse and dongle receiver. Objects with

sharp point may break and leave behind shards.

To remove batteries, please repeat steps 4 to 3 or 2 to 1 in reverse order..

Mouse

Receiver

RX19

ID button and mouse reset button is device make a pair; When does not search the RF device please

push any key after push ID or reset button to make a pair the RF device.

FCC Statement on CLASS B

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.