Datasheet

MODEL : MRG-5800V4V REPORT NO. : 10090203

3.2.4 EUT Configuration

The equipment's which is listed 4.2.1 are installed on Radiated Emission Test to meet the

Commission requirement and operating in a manner which tends to maximize its emission

characteristics in a normal application.

3.2.5 Operation Condition of EUT

Same as Conducted Power Line Test which is listed in 3.1.5 .

3.2.6 Radiated Emission Data

The measurement range of radiated emission which is from 30 MHz to 1000 MHz was investigated.

The initial step in collecting conducted data is a spectrum analyzer peak scan of the measurement

range for all the test modes. Then the worst modes were reported the following data pages.

3.2.7 Test Photo and Setup

※

During the radiated test, the power-supply has to test with chassis, which is not allowed to be

operated stand-alone. (For user, final assembly has to comply with corresponding EMC-and

safety-regulations.)